Motivation
The goal of Commission 3 (COM3) is to define appropriate and reliable procedures to establish the safety of existing structures and any associated requirements for interventions to extend the safe operation or working life of such structures.
Scope and objective of technical work
COM3 will deliver this through the preparation of comprehensive guidance for the assessment of existing concrete structures, providing complementary recommendations to those given in the fib Model Code for Concrete Structures 2010 (fib MC2010), which was prepared primarily for the design of new concrete structures. To that end, COM3 will produce documents supporting the development of fib Model Code 2020 (fib MC2020) to be used for the assessment of the present structural performance and the prediction and evaluation of future structural performance of existing concrete structures with or without damage and/or revised operational requirements, together with any associated interventions required to extend their service life. It is envisaged that the documents to be produced could include technical reports, reviews of the state-of-the-art and technical history/evolution, technical guidelines, specifications and recommendations.
Commission Chair
Deputy Chair
| First name | Last name | Country | Affiliation |
|---|---|---|---|
| Joost | Walraven | Netherlands | Delft University of Technology |
| Miroslav | Sykora | Czech Republic | Czech Technical University in Prague, Klokner Institute |
| Alfred | Strauss | Austria | BOKU University |
| Raphael | Steenbergen | Netherlands | TNO Structures and Safety |
| Giuseppe | Mancini | Italy | Politecnico Torino |
| Gerrie | Dieteren | Netherlands | TNO |
| David | Fernández-Ordóñez | Switzerland | fib |
| Stuart | Matthews | United Kingdom | Matthews Consulting |
| Sylvia | Kessler | Germany | Helmut-Schmidt-University/ University of the Federal Armed Forces Hamburg |
| José | Campos e Matos | Portugal | University of Minho |
| Thomas | Braml | Germany | Universität der Bundeswehr München |
| Tamon | Ueda | China | Shenzhen University |
| Robby | Caspeele | Belgium | Ghent University |
| Dario | Coronelli | Italy | Politecnico di Milano |
| Agnieszka | Bigaj-van Vliet | Netherlands | TNO - Buildings, Infrastructures and Maritime |
| Wouter | Botte | Belgium | Ghent University |
| Takumi | Shimomura | Japan | Nagaoka Univ. of Technology |
| Kamyab | Zandi | Canada | Timezyx Inc |
| Maria Pina | Limongelli | Italy | Politecnico di MIlano |
- TG3.1 - Reliability and safety evaluation: full-probabilistic and semi-probabilistic methods for existing structures
- TG3.2 - Modeling of structural performance of existing concrete structures
- TG3.3 - Existing Concrete Structures: Life Management, Testing and Structural Health Monitoring
- TG3.4 - Selection and implementation of interventions / through-life management activities and measures for concrete structures
- TG3.5 - Forensic engineering
-
TG3.1 - Reliability and safety evaluation: full-probabilistic and semi-probabilistic methods for existing structures
fib Task Group 3.1 (TG3.1) focuses on the reliability and safety evaluation of existing structures and focuses on the development of risk and reliability target levels for assessment and retrofitting, the full-probabilistic modelling of the structural safety and semi-probabilistic assessment methods for existing structures.
The TG aims to (i) resolve pending questions with respect to the full-probabilistic assessment and target safety levels for the assessment and retrofitting of existing structures, and (ii) support the risk and reliability related questions arising due to the developments in TG3.2, TG3.3 and TG3.4.
Initially, attention will be given to developing a technical guideline for assigning target reliabilities and making a suitable risk differentiation for existing and monumental structures, considering both individuals and groups.
First name Last name Country Affiliation Dimitris Diamantidis Germany Fachhochschule Regensburg Diego Lorenzo Allaix Netherlands TNO Neitherlands Miguel Prieto Sweden RISE Research Institutes of Sweden Marcus Achenbach Germany LGA KdöR Max Hendriks Netherlands Delft University of Technology Giuseppe Mancini Italy Politecnico Torino Jan Cervenka Czech Republic Cervenka Consulting Ltd Alfred Strauss Austria BOKU University Miroslav Sykora Czech Republic Czech Technical University in Prague, Klokner Institute Raphael Steenbergen Netherlands TNO Structures and Safety David Fernández-Ordóñez Switzerland fib Peter Tanner Spain Cesma Ingenieros, SL José Campos e Matos Portugal University of Minho Paolo Castaldo Italy Politecnico di Torino Diego Gino Italy Politecnico di Torino Christian Glock Germany Technical University of Kaiserslautern Ramón Hingorani Spain Instituto Eduardo Torroja Carlos Paul Lara Sarache Spain Instituto Eduardo Torroja Luis Neves United Kingdom Nottingham University Wouter Botte Belgium Ghent University Filippo Sangiorgio Sweden COWI AB Lukas Novak Czech Republic Brno University of Technology Aurelio Muttoni Switzerland École polytechnique fédérale de Lausanne (EPF Lausanne) Mayer Melhem Australia Monash University Peter Kotes Slovakia University of Zilina João André Portugal Portuguese National Laboratory for Civil Engineering Dara McDonnell Australia Arup Robby Caspeele Belgium Ghent University Pierre van der Spuy South Africa Stellenbosch University Marcelo Melo Brazil Casagrande Engenharia Qianhui Yu China École polytechnique fédérale de Lausanne (EPF Lausanne) Giorgio Monti Italy Sapienza Università di Roma Oladimeji Olalusi South Africa University of Kwazulu-Natal -
TG3.2 - Modeling of structural performance of existing concrete structures
It is widely understood and accepted that existing concrete structures are different entities to contemporary new concrete structures. There are numerous flexibilities inherent to the process of the design of new concrete structures and in their construction. Existing structures are entities that can, in principle, be interrogated and assessed to establish their actual nature and condition. However, such processes have their difficulties and uncertainties and it is in fact often very difficult to interrogate an existing structure. These difficulties increase when an existing structure has experienced damage or deterioration. Accordingly, substantial and different uncertainties remain with respect to existing structures and these uncertainties need to be taken into account in the structural assessment process.
First name Last name Country Affiliation Max Hendriks Netherlands Delft University of Technology Daniel Dunkelberg Germany Pirlet & Partner Ingenieurgesellschaft mbh Beatrice Belletti Italy Univ. degli Studi di Parma - Engineering and Architecture Carmen Andrade Spain Centre Internacional de Mètodes Numèrics en l’Ènginyeria (CIMNE) Zila Rinaldi Italy University of Rome “Tor Vergata” Alfred Strauss Austria BOKU University Gerrie Dieteren Netherlands TNO Daia Zwicky Switzerland Univ. of Applied Sciences Fribourg Ane de Boer Netherlands Ane de Boer Consultancy Christis Chrysostomou Cyprus Cyprus University of Technology Stuart Matthews United Kingdom Matthews Consulting David Fernández-Ordóñez Switzerland fib Daniel Kuchma United States University of Illinois Yuguang Yang Netherlands TU Delft Francesco Tondolo Italy Politecnico di Torino Tamon Ueda China Shenzhen University Hikaru Nakamura Japan Nagoya University Dario Coronelli Italy Politecnico di Milano Marta Del Zoppo Italy University of Naples Federico II Camillo Nuti Italy Università degli Studi Roma Tre Kamyab Zandi Canada Timezyx Inc Giuseppe Di Nunzio Italy - Miguel Prieto Sweden RISE Research Institutes of Sweden Attila Vardai Hungary NYUGTAN Mernoki Szolgaltato Kft. Francesca Vecchi Italy University of Parma Eva Lantsoght Ecuador Universidad San Francisco de Quito Mohammad Mehdi Kashani United Kingdom University of Southampton Davide Lavorato Italy Università Roma Tre, Italia Isabel Martínez Sierra Spain Consejo Superior de Investig. Cientificas Hyunjin Ju Korea, Republic of Hankyong National University Kunal Kansara United Kingdom National Composites Centre UK (University of Bristol) Ivan Markovic Switzerland Eastern Switzerland University of Applied Sciences / Ostschweizer Fachhochschule Rapperswil Elena Casprini Italy University Adriano Castagnone Italy - Lorenzo FRANCESCHINI Italy - Joost Walraven Netherlands Delft University of Technology Alberto Meda Italy University of Rome “Tor Vergata” Zanyar Mirzaei Switzerland Pini Gruppe AG Fabio di Carlo Italy University of Rome Tor Vergata Simone Ravasini Italy University of Parma Ignasi Fernandez Sweden - -
TG3.3 - Existing Concrete Structures: Life Management, Testing and Structural Health Monitoring
The Task Group 3.3 (TG 3.3) specifies and extends their focus in the framework of Non-Destructive-Testing (NDT) and Structural Health Monitoring (SHM) required for the through-life management of existing concrete structures according to the following:
- Concepts for extension of service life of reinforced concrete structures supported by NDT and SHM;
- Specific testing/ specific monitoring; testing/ techniques combined with autonomous robotic systems (remote monitoring systems) or based on digital images as well as innovative self-monitoring materials (repair, strengthening);
- Monitoring of site-specific load actions (e.g. traffic loads, etc.);
- Data management for reinforced concrete structures using NDT/SHM: data reporting and data analysis of NDT/SHM applying AI;
- Reliability assessment of NDT/SHM methods applied on reinforced concrete;
- Building Information Modelling (BIM) and Digital Twins (DT) for existing concrete structures as a decision-making tool using NDT/SHM data; implementation of SHM in BIM;
- Decision-making on structural level to foster the transformation from periodic to predictive/preventive maintenance including the assessment on the environmental impact of the decision: How can NDT/SHM contribute to operate our infrastructure in the most sustainable way?
- SHM guidelines for newly designed complex concrete structures concerning their exploitation phase, also including BIM and DT.
First name Last name Country Affiliation Gabriele Bertagnoli Italy Politecnico di Torino David Lehky Czech Republic Brno University of Technology Drahomir Novak Czech Republic Technical University of Brno Stefan Maas Luxembourg Université du Luxembourg Thomas Petraschek Austria OBB-Infrastruktur AG Mark Alexander Ahrens Germany Ruhr-Univ. Bochum Michael Hansen Germany Leibniz Universität Hannover Davide Lavorato Italy Università Roma Tre, Italia Geert Lombaert Belgium University of Leuven Marian Ralbosky Austria Austrian Research Institute Joost Gulikers Netherlands Rijkswaterstaat Centre for Infrastructure Giuseppe Mancini Italy Politecnico Torino Carmen Andrade Spain Centre Internacional de Mètodes Numèrics en l’Ènginyeria (CIMNE) Alberto Meda Italy University of Rome “Tor Vergata” Alfred Strauss Austria BOKU University Miroslav Sykora Czech Republic Czech Technical University in Prague, Klokner Institute Gerrie Dieteren Netherlands TNO Jonathon Dyson Australia BCRC Brett Pielstick United States Eisman & Russo Stuart Matthews United Kingdom Matthews Consulting David Fernández-Ordóñez Switzerland fib Sylvia Kessler Germany Helmut-Schmidt-University/ University of the Federal Armed Forces Hamburg Peter Tanner Spain Cesma Ingenieros, SL José Campos e Matos Portugal University of Minho Giorgio Monti Italy Sapienza Università di Roma Francesco Tondolo Italy Politecnico di Torino Thomas Braml Germany Universität der Bundeswehr München Joan Casas Rius Spain Tech. Univ. of Catalunya, UPC-BarcelonaTech Marcin Górski Poland Silesian University of Technology Robby Caspeele Belgium Ghent University Eftychia Apostolidi Germany Technical University Darmstadt Chris Hendy United Kingdom Atkins Manfred Keuser Germany BUNG Ingenieure A Milan Holicky Czech Republic Czech Techn. Univ. of Prague - CVUT Camillo Nuti Italy Università degli Studi Roma Tre Marcus Hoffmann Austria Transport Infrastructure Asset Management Emilio Bastidas-Arteaga France Universite de Nantes Tamon Ueda China Shenzhen University Florian Zimmert Germany Bundeswehr University Munich Frédéric Duprat France INSA Toulouse A. Emin Aktan United States Drexel University Jan Bien Poland Wroclaw University of Science and Technology Véronique Bouteiller France University Gustave Eiffel Necati Catbas United States University of Central Florida Mehmet Celebi United States USGS Eleni Chatzi Switzerland ETH Zurich Wojciech De Roeck Belgium KU Leuven Ivan Duvnjak Croatia University of Zagreb Lennart Elfgren Sweden Luleå University of Technology Bruno Godart France - Maria Pina Limongelli Italy Politecnico di MIlano Franklin Moon United States Rutgers School of Engineering Luis Oliveira Santos Portugal LNEC Miguel Prieto Sweden RISE Research Institutes of Sweden Muhammad Imran Rafiq United Kingdom University of Brighton Peter Rosko Austria Technical University of Vienna Franziska Schmidt France IFSTTAR Sebastian Thöns Germany BAM Federal Inst. for Mat. Research & Testing Roberto Torrent Switzerland Quali- Ti-Mat Sagl Jorge Ley Urzaiz Spain INTEMAC Daniele Zonta Italy University of Trento Marko Bartolac Croatia University of Zagreb Ruiz De Azua Spain Kinesia Structural Monitoring Elsa Eustáquio Portugal Laboratório Nacional de Engenharia Civil Stefan Küttenbaum Germany Universität der Bundeswehr München Stefan Maack Germany Bundesanstalt für Materialforschung und -prüfung Lisa Ptacek (Mold) Austria Universität für Bodenkultur Jiazeng Shan China Tongji University Helmut Wenzel Austria VCE Volkmar Zabel Germany Bauhaus University Weimar Konrad Bergmeister Austria Univ. Bodenkultur Giovanni Volpatti Switzerland - Diogo Ribeiro Portugal University of Porto Muhammed Basheer United Kingdom University of Leeds Alois Vorwagner Austria - Mieszko Kużawa Poland - Adriano Castagnone Italy - Els Verstrynge Belgium EKU Leuven Hélder Manuel Silva Sousa Portugal University of Minho, ISISE, ARISE Helder Filipe Moreira de Sousa Portugal Brisa Group Francesca Marsili Germany Helmut-Schmidt-University/ University of the Federal Armed Forces Hamburg Christian Kainz Germany - Marco Civera Italy Politecnico di Torino, Department of Structural, Geotechnical and Building Engineering Cosmin Popescu Sweden Luleå University of Technology Mario Torcinaro Spain RWE Renewables Iberia George Wardeh France Un. de Cergy-Pontoise Danièle Waldmann-Diederich Germany Technical University of Darmstadt -
TG3.4 - Selection and implementation of interventions/through-life management activities and measures for concrete structures
The focus will be on the selection and implementation of interventions and through-life management activities and measures for concrete structures. Its final goal is to provide the draft on intervention for the new fib MC2020. The basic procedure is updating “Chapter 9: Conservation” of the fib MC2010, considering recent progress in this field.
The initial focus will be on the preparation of technical guidelines for the selection and implementation of interventions dealing with current major intervention methods.
With respect to through-life management activities and measures for concrete structures, a primary objective will be updating “Chapter 9: Conservation” of the fib MC2010, considering recent technical progress and new ideas.
First name Last name Country Affiliation Etsuji Kikuta Japan Civil Engineering Research Institute for Cold Region Dawei Zhang China Zhejiang University Philip McKenna Ireland Halcrow Group Ltd., a CH2M HILL Company Giuseppe Mancini Italy Politecnico Torino Carmen Andrade Spain Centre Internacional de Mètodes Numèrics en l’Ènginyeria (CIMNE) Amir Rahimi Germany Bundesanstalt für Wasserbau Jan Vítek Czech Republic Metrostav a. s. Lojze Bevc Slovenia ZAG Slovenije Koichi Kobayashi Japan Gifu University Jonathon Dyson Australia BCRC Attila Vardai Hungary NYUGTAN Mernoki Szolgaltato Kft. Francesco Bencardino Italy University of Calabria Christoph Gehlen Germany TUM School of Engineering and Design Frank Papworth Australia BCRC David Fernández-Ordóñez Switzerland fib Meini Su United Kingdom University of Manchester Thanasis Triantafillou Greece University of Patras Xilin Lu China Tongji University Costantino Menna Italy University of Naples Federico II Norbert Randl Austria Carinthia Univ. of Applied Sciences Hikaru Nakamura Japan Nagoya University Tamon Ueda China Shenzhen University Anna Saetta Italy Università Iuav di Venezia Marco Savoia Italy University of Bologna Ji-hua Zhu China Shenzhen University Hugo Corres Spain FHECOR Ingenieros Consultores Marta Del Zoppo Italy University of Naples Federico II Takumi Shimomura Japan Nagaoka Univ. of Technology Alessio Cascardi Italy University of Salento Isabel Martínez Sierra Spain Consejo Superior de Investig. Cientificas Zanyar Mirzaei Switzerland Pini Gruppe AG -
TG3.5 - Forensic engineering
We have an enormous and an ever-increasing heritage of reinforced and prestressed concrete structures, many of which are currently approaching the end of their intended service life. However, there are pressing societal, economic and environmental needs to safely extend the service lives of many of these structures. This poses a delicate and challenging task if we are to make appropriate decisions on the through-life management and care of these constructed assets to achieve this while avoiding transferring an excessive burden onto the next generation. To do this we need a better understanding of the real behaviours of structures, why they may not achieved the required performance and, ultimately, what may cause them to fail.
First name Last name Country Affiliation Daniele Zonta Italy University of Trento ab van den bos Netherlands NLyse Ehsan Noroozinejad Canada The University of British Columbia (UBC) Hans-Dieter Beushausen South Africa University of Cape Town Eugen Brühwiler Switzerland EPFL Ted Donchev United Kingdom Kingston University Roberto Felicetti Italy Politecnico di Milano Frank Papworth Australia BCRC Alfred Strauss Austria BOKU University Maria Pina Limongelli Italy Politecnico di MIlano Fabrizio Palmisano Italy PPV Consulting Studio Palmisano Perilli Associati, Peter Robery United Kingdom Robery Forensic Engineering Ltd Branko Glisic United States Princeton University Johannes Hübl Austria University of Natural Resources and Applied Life Sciences Necati Catbas United States University of Central Florida Hani Nassif United States Rutgers University-New Brunswick Luca Possidente Italy - Eva Lantsoght Ecuador Universidad San Francisco de Quito Mattia Bado Italy - Jörg-Martin Hohberg Switzerland Freelance Auditor Andreas Lampropoulos United Kingdom University of Brighton João André Portugal Portuguese National Laboratory for Civil Engineering ab van den bos Netherlands NLyse Umesh Rajeshirke India Spectrum Techno Consultants Pvt. Ltd Fulvio Parisi Italy University of Naples Federico II Venkataramana Heggade India Indian National Academy of Engineers Giovanni Volpatti Switzerland - Leandro Moretti Sanchez Canada - Christos Giarlelis Greece EQUIDAS Consulting Engineers
Convener
Co-Convener
Convener
Co-Convener
Convener
Co-Convener
Convener
Co-Convener
Convener
Co-Convener
